Software-Documentation

DaVinci 5
Bewotec-Application-Services
GenVAS-Services
SETTINGS for CETS
Modifications

Content

Content
1 Introduction
2 CETS Configuration of GenVAS-Services in KUONI environment
2.1 Current situation - Two instances of GenVAS
2.2 Configuration of the CETS-settings for GenVAS-Instance connected to Manta-database
2.2.1 Shut-down both GenVAS instances
2.2.2 Start GenVAS in Terminal Mode
2.2.3 Restart of GenVAS-Service Instances
2.3 Connection test

Introduction

In DaVinci-Version 1027 the GenVAS-Application has been extended: It is now able to listen to a specific CETS-socket. This listens to requests from the "Central European Touristic Solution" (CETS), a central reservation system for travel agencies.
This document describes the correct way of configuring the GenVAS-Service for CETS in Version 1028.

CETS Configuration of GenVAS-Services in KUONI environment

Current situation - Two instances of GenVAS

Currently Kuoni runs 2 different instances of GenVAS-services; one connects to the ROTUNDA/INTENS- the other to the MANTA-database.
 GenVAS-Service / Instance 1 connects to the ROTUNDA/INTENS-database
EXAMPLE (as situation was reproduced in Bewotec environment)




 GenVAS-Service / Instance 2 connects to the MANTA-database
EXAMPLE (as situation was reproduced in Bewotec environment)

Configuration of the CETS-settings for GenVAS-Instance connected to Manta-database

In Version 1028 the configuration of the CETS-Settings CAN be made via the Terminal-mode of GenVAS.

Shut-down both GenVAS instances

Start GenVAS in Terminal Mode

Open Settings for Services and define CETS-Settings in Commandline for MANTA-SERVICE

Manta Service
-Db:DSN=Datasourcename;UID=sa;PWD= -port:Genesis-Socket-Port -CETSPort :700 -Pipe:GenVasPipe2
Use "-CETSPort:Portnumber" to define the port for the CETS-SOCKET in the according service.

Restart of GenVAS-Service Instances

Connection test

Start GenVAS in Terminal mode and connect to the different GenVAS-Services:
First Terminal connects to ROTUNDA/INTENS-Service


Second Terminal connects to MANTA-Service





TEST-Request from CETS-INTERFACE:

The Terminal-Mode of the correct GenVAS-Instance shows the Thread:

The response appears in CETS:


TEST-Request from GENESIS to Manta-Database:
Threads appear in the Terminal-Mode

Response is displayed in Genesis:


TEST-Request from GENESIS to ROTUNDA/INTENS-Database:
Threads appear in the Terminal Mode

Response is displayed in Genesis: